Fuel for reactive Engines TS-1
Country of origin:
Turkmenistan
Production standart:
TDS 10227-86 change №3
application:
Commercial Aviation: Ideal for commercial airliners, providing the necessary power and efficiency for safe and reliable passenger and cargo transportation.
Private and Business Jets: Suitable for small business and private jets, ensuring optimal performance for both short and long-distance flights.
Cargo and Freight Transport: A key fuel source for cargo planes, supporting the global logistics and freight industry.
Private and Business Jets: Suitable for small business and private jets, ensuring optimal performance for both short and long-distance flights.
Cargo and Freight Transport: A key fuel source for cargo planes, supporting the global logistics and freight industry.
Note:
for fuel TC-1, used for all climatic zones, with the exclusion of zones 1, is allowed temperature of crystallizations beginning not above -50oC
for fuel TC-1, used for all climatic zones, with the exclusion of zones 1, is allowed temperature of crystallizations beginning not above -50oC
Technical specifications:
№
Description of index
Figure
1
775
Density 200 C , kg/m3
Fraction composition:
2
3
1,25
Kinematic viscosity
8
200C mm2/s (sST) not less than
-400C mm2/s (sST)
Lower heat of combustion, not less than k Dž/kg
4
42 900
5
25
Height of nonsmoke flame, mm
Acidity, mg KOH by 100 sm3, not more than
6
0,7
7
3,5
Iodine number,mg KOH by 100 g, not more than
Flash point in close cup, 0C, not less than
8
28
— Initial boiling point, 0C, not more than
150
10%, 0C, not more than
165
9
-50
Теmperature of crystallizations beginning, 0C
11
22
Mass portion of aromatic hydrocarbons, %, not more than
Actual resin concentration, mg 100 sm3 fuel, not more than
12
5
13
0,25
Mass portion of total sulfur, %, not more than
15
no
Mass portion of hydrogen sulfide
Copper plate testing (100 0C at 3 hour)
16
ok
Thermo tart stability in steady-state condition under 150 0C (sediment concentration) mg by 100 sm3 fuel, not more than
10
18
Mass portion of mercaptane sulfur, %, not more than
14
0,005
17
0,003
Ash contents, %, not more than
19
no
Contents soap of the naften acids
Density 200С, kg/m3, not more than
20
860
Presence of acids and bases, soluble in water
18
no
50%, 0C, not more than
195
90%, 0C, not more than
230
98%, 0C, not more than
250
21
1
Lnteraction with water, ball, not more than
1
condition to surfaces of the section
condition of the separate phases
The product information provided here is indicative and is subject to confirmation at the time the order is processed.